Construction and Renovation

Efficient Logo solo.png
Posts tagged grass
Rehab for your Lawn

After months of dry weather and in some areas, extreme drought conditions our lawns are showing signs of stress. Some are bouncing back better than others but all are in need of help in some way or another. Many homeowners rely on automatic irrigation and heavy fertilization programs to maintain a lush green lawn. Water restrictions and indefinite water bans made regular lawn maintenance difficult and in some ways detrimental. 

Turf grass is opportunistic. When conditions are right the grass will flourish, usually. When conditions are poor grass will show it's weaknesses and in some cases throw in the towel altogether. 

The key to a consistent lawn is tough love. 

Don't bother trying to repair your lawn during hot summer months. They're known as cool weather grasses for a reason - they thrive in cooler weather. Spring can be a good time to make repairs but the window is often short and unpredictable. Fall is the best time to give your lawn attention. Set it up for success in the fall and send it off on it's own, see how it does and if it needs help, wait until next fall to try something else.

The above picture is what most New England homeowners saw in their yards as the summer came to an end this year. Patchy tufts of green. 

A lawn is typically made up of a variety of grass species. When the lawn is thick, all varieties of grasses are doing well. When the lawn is patchy like the picture, the weaker grasses have gone dormant or died off and left the stronger or more opportunistic grass to thrive. 

First: When the nights have cooled enough that you see substantial dew in the morning, cut the lawn short. You should have been mowing tall all summer, between 3.5 and 4 inches. Now it's time to go down to about 3 inches. 

Cool nights and shorter days lessen the need for irrigation, increasing the success rate for grass seed. Cooler weather also slows the spread of weeds and other warm weather invasives like crabgrass.

Next: Aerate! Deep core aeration. Lot's of holes! Aerate immediately after you mow when the lawn is shortest. Some people like to mow again after aeration to pulverize the plugs. This is a matter of preference. Both have their benefits. 

After aerating, fertilize and seed. The product will make it's way into the holes .

A few days to a week after aerating and seeding you'll see signs of life. The picture above is the same patch of grass in the first picture. Notice the young grass shoots in the middle of the picture. 

Top dress with compost or topsoil after seeding, the same day or up to a few weeks later. The above spreader is used to spread a thin layer of compost over the lawn. The same can be done manually with a shovel, a rake, a strong back and a team of help!

The idea here is to add organic micro nutrients to the top layer of soil which will help retain water, and fertilizers in the seasons to come. It will also help to sow in new grass seed. 

When you're finished your lawn is likely to look like hell. You may wonder why you're doing all of this and how it's going to help. After a few weeks you'll see noticeable improvement in color and thickness. Your lawn will winter better and come back faster in the spring. But the real reason you're doing all of this is to get it through next summer. You want deep healthy roots that will store water between rains and find water during droughts. You want thick grass that will feed itself between fertilizer applications and grass that can stand up to foot traffic and heavy use. Strong grass will resist disease and infestation. Strong grass will require less water and fewer chemicals. Strong grass will cost less.

Although you may spend more time mowing...

 

This is a rehab, not a regimen. This is something that should be done if your lawn is in decline or showing signs of distress over the long term.

This may be used as a maintenance practice but I don't suggest doing so more often than every four years. 

Do not use herbicides until grass has filled in. Herbicide can negatively affect grass seed and seedlings.

A service like this is likely to cost anywhere from 8 to 12 cents per square foot of lawn.

Sod Installation and Care

So you're renovating your lawn; starting new, adding too, or replacing. You have options to consider. Most contractors will try to sell hyrdoseeding as a viable option. Traditionalists will plant a lawn using seed and straw mulch. However a third option that is usually left unsaid here in the northeast is sod. I've only had the opportunity to install a handful of sod lawns over the years. However, having grown up in southwest Florida where sod is the only way to a lawn I wish it were more popular here. After installing sod on a small project in Portsmouth last week I thought I'd share.

The first challenge sod presents is logistical. Sod is cut to order and it's shelf life isn't much more than 24 hours. (Stay away from big box sod!) During the busy season orders need to be placed weeks in advance. In quieter months you can call an order in a few days before it can be delivered. If you have the capacity to pick up the sod yourself (as shown in the pictures above) you should call the day before to get on their schedule for cutting. 

The Process - abridged version

Sod is cut from fields where it is grown from seed and meticulously cared for. It is cut using a tractor driven machine as shown above. The cutting machine can cut, roll and stack 500 square feet of sod in a matter of minutes. A forklift carries the pallet of sod from the field to be loaded onto the trailer. 

  •  One pallet of sod equals 500 square feet cut into 50 rolls 
  • Always order extra. As with any automated system, the sod cutter is not perfect and often makes mistakes.

Transport 

For large projects, sod is delivered via tractor trailer truck. Each pallet can be unloaded and set adjacent to the area it is to be installed. For smaller projects like my Portsmouth job, it's easiest to work from the trailer. It is important to install the sod as soon as possible. As sod sits rolled up it begins to generate heat and heat initiates the breakdown and decay of the sod

  • The goal is to keep it alive!

Installation

Preparation is key, just like any landscaping task, but we're going to skip over that and focus on the green stuff. Begin by staggering your joints. The weakest link in the sod system is the joints. Once the joints dry out the grass begins to die. Have you ever seen a sod lawn installed and weeks later it looks like green squares with brown grid lines? The less time the sod spends rolled up the less likely it is to hold onto its rounded shape. As you unroll the sod you may need to roll the edges in the opposite direction to get them to lay flat and butt together evenly. This is where a sod roller can be helpful. I choose to use another method which I will explain shortly. 

Stagger Joints

Stagger Joints

Cutting

Sod needs to be cut to fit your lawn. If you choose the longest straight run to roll out your sod your cutting will be less. Many tools can be used for cutting but there is no tool specifically for this task. I've had success using a spade shovel, machete and garden edger. However my newly discovered tool of choice for cutting sod is the Hori Hori Knife. 

Watering

Once the sod is laid out water the ever-living hell out of it! I've found soaking the sod as it's laid out helps it to form to the soil below. As the sod saturates you'll see any joints that aren't quite right. When the sod is wet it can be stretched and flattened. As it dries slowly it will stay in place. When you prepared your soil for sod you should have amended your soil and fertilized with a root stimulator. A heavy watering will activate the fertilizer and encourage the roots to make their new home.

Water, no SOAK thoroughly 

Water, no SOAK thoroughly 

Care 

Sod is instant gratification. Sod is not instant lawn. While sod looks great the day it's installed it takes just as much care and attention to ensure it establishes over the coming weeks as any new planting. 

  • Water two to three times daily in the first week
  • The key is to keep the joints moist
  • Keep traffic to a minimum
  • Do not mow until the lawn can support a mower - usually 3 to 4 weeks
  • Do not try to repair or correct any damaged areas until the lawn has established - unless the sod is failing, in which case take appropriate action immediately
  • Do not apply fertilizer, herbicide or pesticide to sod lawns until after the fourth mowing - exception being starter fertilizer
  • Inspect periodically, especially after a heavy rain event

Why we don't see more sod installations in the Northeast

  • Application

The best applications for sod are small flat areas or areas easy to manage and irrigate. Our cool weather grasses grow best in spring and fall while they're often dormant in the hot summer months. Cool weather grasses rely on their soils for nutrients and water. Top dressing is becoming all the more popular as we become more aware of our lawns needs. [Top dressing is a method of covering the lawn with soil to prepare it for the next growing season - more to come in a later post.] Establishing a new root system takes a lot of energy and effort by the plants themselves and that translates to stress. Hot weather grasses have root systems that are actually above the soil so they can grow on virtually any medium. We used to to see sod that had fallen off of trucks growing on roads and sidewalks. Florida sod needs only water and nitrogen; water comes frequently in FL and nitrogen can be absorbed from the air. Here in NH a healthy lawn starts with healthy roots. When sod is cut the roots are sheared off and left to die in the field. The rolls that are installed have very small roots that need our help to find the soil. So while sod is a very attractive option it is very care intensive in it's establishment. My advice to you is to consider your capacity for lawn care. If you feel you're up for the task of installing and or maintaining a sod lawn, by all means - enjoy! 

  • Cost

When compared to hydroseeding, the cost of sod before installation is more than double. I will argue that the product you get from sod is worth more than double that of hydroseed. Conventional seed and mulch can cost anywhere from $0.05per square foot when installing it yourself to $0.15 per square foot when professionally installed. Consider these to be installed over prepared soils but to include an application of starter fertilizer and lime. With a sod installation you can expect to pay $0.35 per square foot for just the sod before delivery. Installation and delivery will vary based on the project. 

What you can expect to get out of your lawn is equal to the time you put into it.